Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Scalance X212-2LD V3.0

Created by: davidoff at: 2/22/2008 2:35 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/22/2008 2:35 PM	Rate (0)
davidoff Posts: 8 Rating: (0)	Hello! I have switch Scalance X212-2LD V3.0 wich i would connect to CPU414-3PN/DP over Profinet IO. In hardware catalog i cant find switch version 3.0 there is only V2.0. I downloaded last HSP but i still can't find it.When i download hardware configuration (with switch v2.0)to CPU it send me that module is configured but not available!? Have whoever salvation for this problem? Thanks! Best regard, David
davidoff Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/22/2008 3:11 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear David, as I understood the SIMATIC Update about it you will not get a new GSDML File, because no newly configurable features have been added. So you have to stay with the "old" GSDML Files. I wonder, did you configure the Device name of the SCALANCE X212 yet? Best regards J_Bell.
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

2/22/2008 3:21 PM	Rate (0)
davidoff Posts: 8 Rating: (0)	Hi, J-Bell! Yes, I configure Scalance X212-LD with Primary Setup Tool. But whenI download configuration To Simatic PLC it returns system failure because wrong inserted type of switch. David
davidoff Posts: 8 Rating: (0)	Last edited by: davidoff at: 22.02.2008 15:22
Suggestion To thank Quote Answer

2/22/2008 4:28 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear David, could you provide us with some Screenshots what you do and where you get the Message? This would surely be very interesting. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on