Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SCALE block in TIA Portal V11

Created by: hidayatn at: 3/20/2013 10:09 AM (6 Replies)

Rating (2)

Thanks 1

7 Entries

3/20/2013 10:09 AM	Rate (0)
hidayatn Posts: 5 Rating: (1)	Hallo, i'm a student and i have a problem to use SCALE block in TIA Portal V11, in this case, i need to scale analog input data (0- 27648) which is manipulated by using Potensiometer and i need output value (0-100), could you help me and give me simple sample to solve this. in this project i use S7300 - CPU315F 2PN/DP. Thank you so much Best Regard
hidayatn Posts: 5 Rating: (1)	Last edited by: O_Moderator at: 3/20/2013 10:24 AM new subject after splitting from /tf/WW/en/Posts/31698#top
Suggestion To thank Quote Answer

3/20/2013 10:18 AM	Rate (1)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, Have a look at attached file, both fc105(scale) and fc 106(unscale) are configured to convert input to 0.0-100.0 and back to 0-27648. Regards, Marcjan Attachment scale_unscale.jpg (4275 Downloads)
	Last edited by: Marcjan at: 3/20/2013 10:35 AM Added TIA example to picture Last edited by: Marcjan at: 3/20/2013 10:35 AM Added TIA example to picture Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

3/20/2013 3:57 PM	Rate (0)
JFTech11 Posts: 2 Rating: (0)	I have done this in TIA Portal V11 SP1 Upd2 and used the instruction sequence shown in the system manual (s71200_system_manual_en-US_en-US.pdf) on page 188. Use Norm_X and Scale_X both on analog inputs, and analog outputs. I read a 0-10,000 psi pressure transducer that is 0-10vdc and this gives me a correct and scaled value. Norm_X 0 min, and 27648 max, then Scale_X 0 min and 10,000 max. I output to a V/P pressure transducer at 0-10vdc/0-100psi using Norm_X at 0 min and 100 max, then scale to 0 min and 27648 max. Works great! Picture is from the manual, I don't have a screenshot of my logic. This was for an S7-1200. I don't know if it will work in an S7-315. Attachment Norm-Scale.jpg (2777 Downloads)
JFTech11 Posts: 2 Rating: (0)	Last edited by: JFTech11 at: 3/20/2013 3:59 PM
Suggestion To thank Quote Answer

3/21/2013 9:21 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, The scale function works with a 315, the norm function is not for the 300 series. You can see in attached picture how it works for the 315 and where to find the block. This block is simular to the Step7 5.X blocks and that block always worked for me, so i see no reason why the TIA block should not work. Regards, Marcjan Attachment scale-315.jpg (1840 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

3/23/2013 10:10 PM	Rate (0)
hidayatn Posts: 5 Rating: (1)	Hallo, Thanks for all.I have solved my problem in using SCALE Block with CPU315, in this problem i have just known that we also have to change the Data Type of Input Analog from Word into Bit which is available in the PLC Tags, otherwise we couldn't use this analog input (IW288) in the IN Pin on the SCALE Block FC105. So we don't have to convert Analog Input Data Type using convert block to convert from Word into Bit. Thank you
hidayatn Posts: 5 Rating: (1)
Suggestion To thank Quote Answer

3/23/2013 10:27 PM	Rate (1)
hidayatn Posts: 5 Rating: (1)	Hallo, Thanks for all.I have solved my problem in using SCALE Block with CPU315, in this problem i have just known that we also have tochange the Data Type of Input Analog from Word into Bit which is available in the PLC Tags , otherwise we couldn't use this analog input (IW288) in theINPin on the SCALE Block FC105. So we don't have to convert Analog Input Data Type using convert block to convert from Word into Bit. I realized that in this case the default data type of my Analog Input is Word. Thank you Attachment SCALE FC105 - TIA V11.jpg (1855 Downloads)
hidayatn Posts: 5 Rating: (1)	Last edited by: hidayatn at: 3/23/2013 10:29 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayan_Kereyev

6/2/2017 1:07 PM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 12/4/2024 Posts: 1024 Rating: (14)	New question published by Asindisiwe is split to a separate thread with the subject Implementing multi speed action control on a PLC. Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on