Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Screen Flipping problem with Clients-Server configuration

Created by: Anil Belkery at: 12/7/2007 5:15 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/7/2007 5:15 AM	Rate (0)
Anil Belkery Posts: 52 Rating: (0)	Dear All, I am using Stand alone Wincc 6.2 in Client-Server Configuration, am facing a problem while flipping a screen on client. when flipp the screen on any of the clients the same sceen if is being automatically flipped on the server. Anticipating your response. Warm Regards, Anil
Anil Belkery Posts: 52 Rating: (0)
Suggestion To thank Quote Answer

12/7/2007 11:40 AM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, I can't really understand your architecture... is it a snatd alone station or do you have a client-server system? If you're changing screens on a client and that's affecting a server, I'm assuming it's a client-server system.. How did you configure the navigation? You're not using tags for the navigation, right? Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

12/10/2007 5:23 AM	Rate (0)
Anil Belkery Posts: 52 Rating: (0)	Hi, thanks for your reply. what "Stand alone" means here is wincc scada package only. its not the part of PCS-7 Package.You are correct, Its a Client- Server configuration. waiting for your assistance. Anil
Anil Belkery Posts: 52 Rating: (0)
Suggestion To thank Quote Answer

12/10/2007 2:49 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, So... in WinCC you can have clients with or without projects.. what kind are yours? How did you configure the navigation? Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

6/22/2008 3:20 PM	Rate (0)
tuanda Posts: 1 Rating: (0)	Hallo Danielle Crespo Cavalcanti, I'am Do Anh Tuan, from AMECO[siemens partner] in VietNam I'am facing to the same problem as described "screen flipping problem with Clients-Server configuration". Our system include 1 SERVER & 8 CLIENTS with LAN TCP/IP communication Problem : when flipp the screen on any of the clients the same sceen if is being automatically flipped on the server & other clients. I'am using internal tags to navigation the picture window & in WinCC I have clients without projects. Please kindly emergency support. Thanks in advance Do Anh Tuan AMECO
tuanda Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on