Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Screensaver

Created by: Gorka Herranz at: 1/30/2013 11:19 AM (3 Replies)

Rating (2)

Thanks 2

4 Entries

1/30/2013 11:19 AM	Rate (0)
Gorka Herranz Posts: 38 Rating: (0)	Good morning, I want to ask you if you know any way to show the screensaver only when the machine is on emergency status. I'm using a PCU 50.5 with Sinumerik Operate 4.5 SP1 Thanks.
Gorka Herranz Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

1/30/2013 5:39 PM	Rate (1)
pierre_g Posts: 67 Rating: (5)	Hello, Try with : DB19.DBX0.1 A_SCDark Screen darkening DB19.DBX0.0 A_SCLight Screen light DB19.DBX20.1 E_SCDark Screen darkening Pierre
pierre_g Posts: 67 Rating: (5)
Suggestion To thank Quote Answer

2/1/2013 2:52 PM	Rate (1)
APC Tech Team Posts: 391 Rating: (50)	Hello, if you want to manually manage the screen backlight,you have also to set MD9006 $MM_DISPLAY_SWITCH_OFF_INTERNAL = 0 to disable automatic screensaver management.
APC Tech Team Posts: 391 Rating: (50)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Ekalavya Gorka Herranz

2/4/2013 9:05 AM	Rate (0)
Gorka Herranz Posts: 38 Rating: (0)	I have used MD9006 $MM_DISPLAY_SWITCH_OFF_INTERNAL = MINUTES when DB19.DBX0.1 =0 and after I have done the automatic switching off of the screen after 30 minutes only when the machine is on emergency status by PLC. Thanks.
Gorka Herranz Posts: 38 Rating: (0)	Last edited by: Gorka Herranz at: 2/4/2013 9:05 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on