Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SDK version of WinCC flexible

Created by: kid_26 at: 3/31/2009 8:33 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/31/2009 8:33 AM	Rate (0)
kid_26 Posts: 37 Rating: (0)	Hi all, By using the SDK version of WinCC flexible, does it mean we need to purchase an additional module? The link actually shows SDK for ProTool, not really WinCC Flexible. I am quite new to WinCC. Can you advise on the external DLL function call? Thanks.
kid_26 Posts: 37 Rating: (0)	Last edited by: Blue Moderator at: 31.03.2009 09:01 Splitted and renamed thread
Suggestion To thank Quote Answer

3/31/2009 9:08 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello, With thestandard of WinCC flexible, you couldn't call a function from a DLL. If you want to call a function from a DLL you need the SDK version of Flexible. Look at Siemens contacts for Software Development Kit (SDK) and customer-specific software solutions for panels and ProTool/Pro/Lite as well as WinCC flexible Hope this will helps. Best regards

Suggestion To thank Quote Answer

3/31/2009 11:00 AM	Rate (0)
kid_26 Posts: 37 Rating: (0)	Thanks for the link
kid_26 Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

4/1/2009 3:15 AM	Rate (0)
kid_26 Posts: 37 Rating: (0)	I have just contacted Siemens' staff regarding the SDK version. Unfortunately, it's a separate module from WinCC flexible. Maybe I need to consider another solution.
kid_26 Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on