Navigation

See PLC Tag on FacePlate Screen (WinCC Advanced v11 sp2)

Created by: BurakA at: 4/25/2012 1:08 PM (1 Replies)

4/25/2012 1:08 PM	Rate (0)
BurakA Experienced Member Joined: 2/29/2012 Last visit: 10/17/2024 Posts: 17 Rating: (3)	Hello , I use WinCC v11 sp2 Advanced and i want to create different sizes screen, but i cant. Ask of this forum, some advice "you must use Professional edition because it is not possible do this different size page for WinCC Advanced version, however but if you want , may be try faceplate". I try faceplate but i can not transfer plc data on this faceplate screen. How can i see plc tag data on faceplate screen. Thank You Best Regards Burak ALICI

Suggestion To thank Quote Answer

4/26/2012 9:20 AM	Rate (2)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hi, Well you need to read section in WinCC help about creating faceplates. Here you will find info on how to connect external tag to a faceplate. Just for your quick start I've made small tutorial out of 7 pictures which is attached. It should be clear enought for you. Attachment faceplate.zip (993 Downloads)
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Kumsty Dh_1811