Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Send online command from PC to Logo8

Created by: avash at: 4/22/2015 12:48 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/22/2015 12:48 PM	Rate (0)
avash Posts: 1 Rating: (0)	How do you send online command to logo8 from computer based on Ethernet protocol send on or off command for a ac motor from pc ---------------------------------------------------------------------------------------------------- Split from Obtain data from the Logo! PLC.
avash Posts: 1 Rating: (0)	Last edited by: Min_Moderator at: 4/22/2015 1:51:22 PM New subject after splitting
Suggestion To thank Quote Answer

4/22/2015 2:47 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/29/2023 Posts: 31509 Rating: (3913)	For this you can use the embedded Web server. This will mirror the display of a logo and provides you with the keys of the virtual logo available. Thus, even a non-existent TDE and its keys are made available virtually.

Suggestion To thank Quote Answer

5/11/2015 11:25 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4785 Rating: (123)	New question published by RuiGSP is split to a separate thread with the subject LOGO! 0BA7, sending online command from PC. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

LOGO!_SW_Webserver_M

Follow us on