Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SERVER AND CLIENT CONFIGURATION

Created by: mankar at: 6/1/2009 5:20 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/1/2009 5:20 PM	Rate (0)
mankar Posts: 37 Rating: (0)	Hi.... I am new to this server client configuration in wincc.... Can anybody explain me how to acheive this? What procedure and steps i have to follow?
mankar Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

6/2/2009 8:13 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello, You can start with WinCC Option Client-Server For more info try with searching "WinCC Server client" here in forum. Best regards Hristo Mihalev

Suggestion To thank Quote Answer

6/2/2009 4:20 PM	Rate (0)
cumulus Platinum Member Joined: 9/27/2007 Last visit: 12/18/2020 Posts: 993 Rating: (102)	Hi Information to server client systems, you find in the WinCC Inforamtion System (Help): Configuration > Multi User Systems there are step by step instructions too. regards cumulus
	Learn more about visualization - visit the HMI courses of Siemens AG! siemens.com/sitrain Basic course WinCC (TIA Portal) machine-based https://support.industry.siemens.com/cs/ww/en/view/109758624 Advanced course WinCC (TIA Portal) machine-based https://support.industry.siemens.com/cs/ww/en/view/109758626 Basic course WinCC Professional https://support.industry.siemens.com/cs/ww/en/view/109758618 Basic course SiVArc (Auto. Generation of HMIs) https://support.industry.siemens.com/cs/ww/en/view/109758628 Basic course Energy Suite https://support.industry.siemens.com/cs/ww/en/view/109755577
Suggestion To thank Quote Answer

6/2/2009 8:40 PM	Rate (0)
mankar Posts: 37 Rating: (0)	Hi.... Thanks for your reply.... I am not getting not much information in the pdf... Ihave to know the important settings for establing this configuration... I will also search in forum....... Ifu know the direct solution plz tell me it is very useful.....
mankar Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

6/3/2009 12:34 AM	Rate (0)
Krish Silver Member Joined: 5/24/2007 Last visit: 9/7/2023 Posts: 284 Rating: (27)	Hi Mankar I guess you are asking a very general question and so it not so easy to answer directly. Well if you are talking about a simple solution for a client server system this what you do. Create a Server project in WinCC and complete your development.YouUse a client to connect directly to the server project and run it. The client will start getting the data from the server system. But then during development you have to consider that the client connections will be there and accordingly setup user rights, server data etc. But this is a very basic solution. If you need to have anything more then you may have to use the options to have redundant system or as a multiclient system. Letus know if there is something specific to ask about the client server. Krish

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on