Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Server - ups failrure

Created by: amateur at: 9/5/2007 9:39 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/5/2007 9:39 AM	Rate (0)
amateur Posts: 145 Rating: (3)	On the customer's project we have2 servers. The version of the WinCC is V5.1 sp2. Each PC has its own UPS. The problem is that in the last power failure the second server has lost all the data and now all the WinCC Online Trend Controls are blank. How can we retrieve the data? We have tried to restart the WinCC and the PC but this didn't help. Thanks in advance for your time
amateur Posts: 145 Rating: (3)
Suggestion To thank Quote Answer

9/5/2007 2:35 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi are your server single stations or redundant? Did you activate Redundancy? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

9/6/2007 8:51 AM	Rate (0)
amateur Posts: 145 Rating: (3)	Goodmorning Nemo, The servers are redundant and the redundancy, yes, is activated. With regards
amateur Posts: 145 Rating: (3)
Suggestion To thank Quote Answer

9/6/2007 12:36 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi please attach all your winCC logfiles from both servers in the forum, perhaps the redundancy setting were not ok... nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

9/6/2007 2:01 PM	Rate (0)
amateur Posts: 145 Rating: (3)	Thanks for your quick reply, It is not possible to access the logfiles, because I am not at the customer's PC. In addition,I donot believe thatthis problem has to do with the redundancy settings, since the project worked fine until the last power failure. Is there any other idea? Thanks in advance for your time
amateur Posts: 145 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on