Navigation

Servo Synchronization

Created by: Kunal Bagul at: 11/18/2014 7:09 AM (1 Replies)

11/18/2014 7:09 AM	Rate (0)
Kunal Bagul Posts: 1 Rating: (0)	I have an application of lifting/ sharing a load driven by two servos.I am using CU-320-pn drive with two single drive motor modules of same rating.Currently i have put the drives in MDI mode but the results are not satisfactory.Please suggest me how to do the application with any feedback signals interchanging or any alternative method two run both the drives at same speed & accuracy.
Kunal Bagul Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/18/2014 7:18 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/31/2023 Posts: 21202 Rating: (2797)	Hi, take a look on this Application. Regards Christoph

Suggestion To thank Quote Answer