Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SETAL and ACKNOWLEDGE user cycle alarms

Created by: fsabbatini at: 4/8/2013 6:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/8/2013 6:14 PM	Rate (0)
fsabbatini Posts: 19 Rating: (0)	Hello everyone, does anyone know how to acknowledge a user cycle alarm (set with SETAL, for example SETAL(65000)) without pressing the RESET button? I mean, i do not want to reset the cycle, i just want to acknowledge the alarm and continue the execution. Regards! Franco
fsabbatini Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

4/8/2013 7:40 PM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	fsabbatini Hello everyone, does anyone know how to acknowledge a user cycle alarm (set with SETAL, for example SETAL(65000)) without pressing the RESET button? I mean, i do not want to reset the cycle, i just want to acknowledge the alarm and continue the execution. Regards! Franco Cycle alarms (user) Funktion Clear by 65000 - 65999 Display, interlocking NC start Reset 66000 - 66999 Display, interlocking NC start, no motion after executing the pre-decoded blocks Reset 67000 - 67999 Display Cancel

Suggestion To thank Quote Answer

4/8/2013 10:23 PM	Rate (0)
fsabbatini Posts: 19 Rating: (0)	Thanks a lot. Where sos you find this? Because i looked through a lot of manuals and i couldnt find it
fsabbatini Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

4/9/2013 7:43 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	https://www.automation.siemens.com/doconweb/content.asp?item=4909&cd=sinumerik_sinamics_10_2012_e&scope=all 2.5.1 Classifying user alarms

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on