Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Setpoint Exchange

Created by: chinna at: 7/30/2008 8:12 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/30/2008 8:12 AM	Rate (0)
chinna Experienced Member Joined: 9/10/2007 Last visit: 8/13/2024 Posts: 78 Rating: (3)	Can any body help me... Senpoint Exchange is posible in 810D

Suggestion To thank Quote Answer

7/30/2008 7:33 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 1/10/2025 Posts: 4141 Rating: (359)	hi, what do U mean "Senpoint Exchange" ? pls. give more info.
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

9/2/2008 7:47 AM	Rate (0)
chinna Experienced Member Joined: 9/10/2007 Last visit: 8/13/2024 Posts: 78 Rating: (3)	Setpoint Exchange i.e More than one axis control with one motor ( with secondry encoder)

Suggestion To thank Quote Answer

9/2/2008 6:48 PM	Rate (0)
SteveA Posts: 297 Rating: (41)	According to the NC-60 catalog, the Setpoint Exchange option (6FC5251-0AE76-0AA0) is only available on the 840D or 840DE powerline control. It is not available for the 802, 810 or 840Di versions. SteveA
SteveA Posts: 297 Rating: (41)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on