Navigation

setting up a Logo CIM to communicate to RS485 devices.

Created by: U_a1825964-4638-4615-ad62-a6ef42c8de33 at: 12/20/2022 9:27 AM (1 Replies)

12/20/2022 9:27 AM	Rate (0)
U_a1825964-4638-4... Joined: 10/6/2022 Last visit: 1/26/2023 Posts: 1 Rating: (0)	Good Morning Colleagues, I need help with setting up a Logo CIM to communicate to RS485 devices. How can I test the data is coming through/received ? Prove that the information is present and how to access it? Thanks ------------------------------------------------------------------------------------------ Split from Operating Manual LOGO! CIM Edition 10/2021.
	Last edited by: Jen_Moderator at: 12/21/2022 08:12:10 New subject after splitting
Suggestion To thank Quote Answer

12/21/2022 8:22 AM	Rate (1)
JBS98 Regular Member Joined: 7/19/2022 Last visit: 1/15/2025 Posts: 433 Rating: (71)	Hi U_a1825964-4638-4..., Here is an example of an application where there is documentation on how to communicate a LOGO! by Modbus RTU (RS485): LOGO! CIM - Modbus RTU communication with SINAMICS V20
	If this Information really helps, you could use the Rate function Best Regards, JBS98
Suggestion To thank Quote Answer