Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ShopMill Version

Created by: Pavlik at: 2/17/2010 7:20 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/17/2010 7:20 AM	Rate (0)
Pavlik Posts: 20 Rating: (0)	Hi, Does anybody know the correct SW version of ShopMill and (or) version of measuring cycles for Sinumerik 840D Power Line: SW-NC: 6.02.10 SW-HMI: 6.02.01 PCU50 with HMI Advanced Windows NT 4.0 NCU 573.2 Thank you Pavlik
Pavlik Posts: 20 Rating: (0)
Suggestion To thank

2/17/2010 10:30 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 11/23/2023 Posts: 2683 Rating: (135)	Thread closed, because question is already published in the thread with the subject ShopMill Version. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on