Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens 840D Measuring Cycles

Created by: DWoody at: 5/11/2009 5:01 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/11/2009 5:01 PM	Rate (0)
DWoody Posts: 6 Rating: (0)	Is it possible to use measuring cycle 977 with TOROT active and update the relevant frame. Currently programming 5_Axis DST Portal machining centre. Probe is held in rotating C_Axis therefore require switching of Z_Axis to align with tool axis.
DWoody Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

5/13/2009 6:14 PM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	HI, As far as I know you don't have to do anything special. The system will return the probing results in the active rotated configuration.
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

5/14/2009 7:40 AM	Rate (0)
DWoody Posts: 6 Rating: (0)	Thanks for that, when frame rotation is switched back with TOROTOF will the adjusments madeduring probing be placed in the frame relevant to the WCS or the rotated frame. DWoody.
DWoody Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on