Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens automation tool 3.1

Created by: nigeti at: 12/14/2020 10:21 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

12/14/2020 10:21 AM	Rate (0)
nigeti Member Joined: 10/28/2018 Last visit: 9/9/2022 Posts: 4 Rating: (0)	Hi. I've got siemens automation tool 3.1 installed, free version. The program got installed so that i could down- and upload programs to relevant CPU's. But each time i try i can't get permission, also when I try to change IP address it is not possible. Im trying to download new program to a S7-300 cpu and changing IP adress on the CPU, TP1200 panel and similar slave panel.

Suggestion To thank Quote Answer

12/14/2020 1:22 PM	Rate (1)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 1/31/2023 Posts: 21206 Rating: (2797)	the automation tool doesn't support S7-300

Suggestion To thank Quote Answer

12/14/2020 2:11 PM	Rate (0)
nigeti Member Joined: 10/28/2018 Last visit: 9/9/2022 Posts: 4 Rating: (0)	Thanks!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on