Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens DP/DP coupler to use in a multi master PLC network

Created by: ahkahk at: 4/18/2013 1:00 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/18/2013 1:00 AM	Rate (0)
ahkahk Posts: 1 Rating: (0)	Hey everyone, I would like to ask about Siemens DP/DP coupler to use in a multi master PLC network. There are a DCS system which needs to control several machines with having their own master PLC through Profibus as attached drawing. In attached sketches, it could be seen two option of configuration which not sure the right one. Any feedback, which says the correct option or improvement, would be greatly appreciated. Thanks, Ahk Attachment Multi Master DP-DP Coupler.pdf (119 Downloads)
ahkahk Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 4/18/2013 9:19 AM new subject after splitting from /tf/WW/en/Posts/87624#top
Suggestion To thank Quote Answer

4/19/2013 6:31 PM	Rate (0)
mark1507 Platinum Member Joined: 6/23/2008 Last visit: 6/7/2023 Posts: 1153 Rating: (267)	Hello, What kind are thedevices named E/O OZD?
	"Expert" does not necessarily mean Siemens employee. Please cross-check your requirements always with official Siemens documentation. Also "Experts" are pleased about feedback. Please don't send support requests as PM. Questioners who don't follow up their thread will be put to my list of users to be ignored.
Suggestion To thank Quote Answer

4/20/2013 8:44 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 4/21/2023 Posts: 4617 Rating: (700)	Hi ahkahk, please put the names in S7 language

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on