Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens MAGFLO

Created by: Chris Wints at: 11/6/2014 1:32 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/6/2014 1:32 PM	Rate (0)
Chris Wints Posts: 10 Rating: (0)	Have a mixture of Siemens MAGFLO on a network. Some are Magflo 6000 and some 5100W. Could someone point me in the right direction or even give the title of the required GSD files for Profibus DP?
Chris Wints Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

11/6/2014 2:09 PM	Rate (0)
eisenpferdreiter Posts: 1058 Rating: (93)	Chris Wints Have a mixture of Siemens MAGFLO on a network. Some are Magflo 6000 and some 5100W. Could someone point me in the right direction or even give the title of the required GSD files for Profibus DP? Hello Chris Wints, I hope this will help: EDD/GSD: SITRANS F M MAGFLO MAG6000 DP - Profibus DP - SIMATIC PDM V6.0 EDD/GSD: SITRANS F M MAGFLO MAG 6000 - Profibus DP - SIMATIC PDM V5.2 regards
eisenpferdreiter Posts: 1058 Rating: (93)
Suggestion To thank Quote Answer

11/6/2014 7:28 PM	Rate (0)
danw Gold Expert Joined: 3/28/2010 Last visit: 12/10/2024 Posts: 1097 Rating: (216)	>Some are Magflo 6000 and some 5100W. The 5000 or 6000 is the electronics module that communicates with the outside world, so the 5000 or 6000 electronics module is the one that needs a device driver file for a specific communications protocol like HART, Profibus or Modbus. The 5100W is the flow tube which communicates only with the electronics module, not the outside world.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on