Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens motor with Sinamic Inverter turns very Slow

Created by: winmac at: 6/16/2020 11:49 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/16/2020 11:49 AM	Rate (0)
winmac Posts: 2 Rating: (0)	Hi, I need ur online support regarding the malfunction of our Hydraulic Nailing machine Carriage assy. siemens motor with inverter( Sinamics- 6SL3040-0LA00-0AA1).During automatic operation, the motor turns very slow even if we set the speed on Siemens HMI OP at 100%...There is no fault/alarm on display and the emergcy circuit module displays led ok...When operated in manual mode, it will move or rotate normally forward/backward...The limit switch of the carriage are all ok...The inverter led shows ready(yellow), com(yellow), out>5v(orange led), mod(led off)...your support will be highly appreciated..
winmac Posts: 2 Rating: (0)
Suggestion To thank

6/16/2020 2:29 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 2/4/2023 Posts: 3617 Rating: (407)	Don't post twice the same question.

Suggestion To thank

6/17/2020 7:34 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/27/2023 Posts: 6401 Rating: (126)	Closed cause question posted twice. The second thread with the subject Siemens motor with Sinamic Inverter turns very Slow is published within the conference SINAMICS. Best regards, Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on