Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens Vs GE Fanuc

Created by: Amit_86 at: 5/17/2014 9:15 PM (26 Replies)

Rating (2)

Thanks 19

Result pages:: |; 1 | 2 | 3; |

27 Entries

Entries per page: 10 | 20 | all

5/17/2014 9:15 PM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	Hi Friends, During a Campaign time , We share so manyinformation with each other. Here i go with Comparision between Siemens & GE Fanuc Redundant System. Hope you will like it. Attachment C:\Amit\Siemens_GE_Comparisons.pdf (837 Downloads)
	VANDE MATARAM.....
Suggestion To thank Quote Answer
This contribution was helpful to 7 thankful Users dchartier Khaled_Ezzat H-H Saggy Ste39 PDGANGANI Arasan

5/17/2014 9:35 PM	Rate (1)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 12/5/2024 Posts: 6856 Rating: (1365)	Amit_86 Hi Friends, During a Campaign time , We share so manyinformation with each other. Here i go with Comparision between Siemens & GE Fanuc Redundant System. Hope you will like it. The mentioned redundant PLC from GE is far from robustness and stability of GE-speedtronic series. I have not worked with the CPU by myself but there are neumerous hardware problems that we discuss them with my colleagues in a daily basis.I can list some of problems here but S7 series deserve to be compared by a Giant TMR architecture that handles real tough task!
	Last edited by: hdhosseini at: 5/17/2014 9:40 PM Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users IBN-Service

5/17/2014 9:47 PM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	hdhosseini Amit_86 Hi Friends, During a Campaign time , We share so manyinformation with each other. Here i go with Comparision between Siemens & GE Fanuc Redundant System. Hope you will like it. The mentioned redundant PLC from GE is far from robustness and stability of GE-speedtronic series. I have not worked with the CPU by myself but there are neumerous hardware problems that we discuss them with my colleagues in a daily basis.I can list some of problems here but S7 series deserve to be compared by a Giant TMR architecture that handles real tough task! Thanks Hamid for your Feedback.
	VANDE MATARAM.....
Suggestion To thank Quote Answer

5/18/2014 5:54 AM	Rate (0)
S7 AUTOMAN Posts: 515 Rating: (56)	Dear Amit_86, Thank you for the post. Also it is heard that GE doesnt have a SIL3 certified/rated PLC even some time ago(or was that a false information). Have they released any recently?...any idea?
S7 AUTOMAN Posts: 515 Rating: (56)
Suggestion To thank Quote Answer

5/18/2014 9:09 AM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 12/5/2024 Posts: 6856 Rating: (1365)	And new tips emerging : Problem in Genius BUS(Back-Plane) and reported error on CPU Software Redundancy, not reliable for fast processes. No Analog Force for inputs/outputs Software is only easy to work (PROFICY Machine Edition)
	Last edited by: hdhosseini at: 5/19/2014 7:31 PM Last edited by: hdhosseini at: 5/18/2014 9:26 AM Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users Amit_86 H-H S7 AUTOMAN VVago

5/18/2014 9:15 AM
IBN-Service Posts: 8946 Rating: (999)	Amit_86 ...Here i go with Comparision between Siemens & GE Fanuc Redundant System. ... To Compare Siemens with fanuc is same as compare "Mercedes SLK" with "Messerschmitt Kabinenroller". OK, it is premium time....
IBN-Service Posts: 8946 Rating: (999)
Suggestion Quote Answer

5/18/2014 9:18 AM
S7 AUTOMAN Posts: 515 Rating: (56)	IBN-Service Amit_86 ...Here i go with Comparision between Siemens & GE Fanuc Redundant System. ... To Compare Siemens with fanuc is same as compare "Mercedes SLK" with "Messerschmitt Kabinenroller". OK, it is premium time....
S7 AUTOMAN Posts: 515 Rating: (56)
Suggestion Quote Answer

5/18/2014 9:35 AM
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	IBN-Service [ To Compare Siemens with fanuc is same as compare "Mercedes SLK" with "Messerschmitt Kabinenroller". I can't expect from you beyond this
	Last edited by: Amit_86 at: 5/18/2014 9:40 AM To Compare Siemens with fanuc is same as compare "UMENCHO" with "IBN_SERVICE". VANDE MATARAM.....
Suggestion Quote Answer

5/18/2014 9:47 AM	Rate (0)
VVago Posts: 784 Rating: (52)	Hello, Siemens PLC for every application The Siemens PLC can be a solution since it is a perfect solution for everything you require. You can use it for control task, archiving data, integrating technology. They are all are kind of automation task in small scale. So if you want to find the PLC for the application you have, you can choose this Siemens PLC for your operation. You will get many benefits from this PLC. The most important benefit from this PLC is that you can still save your cost when you have it. What the people know is that having PLC will spend much money. As the PLC with integrated automation, you will still get the high possibility of integration with this Siemens PLC. You know that it is the heart of total integrated automation. Siemens PLC also has the scalability of system. It will allow you to adjust the solution to its most unique very fast as well as in low cost. The Siemens programmable logic controller will also give you the genuine compatibility so you can use it in a wide range of application. You know that its genuine compatibility will deliver the investment protection maximally. So by using this PLC you will be satisfied. Best regards......
VVago Posts: 784 Rating: (52)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users jeet2907

5/18/2014 9:53 AM	Rate (0)
VVago Posts: 784 Rating: (52)	Hello, The development in industry delivers many effects in computer program to help the process of production in certain industry and Siemens PLC is one of the PLC program which is existed in the market today. If you want to have the kind of PLC with the affordable cost and the effective automation system, you should consider this PLC. The Siemens PLC is appropriate for many applications. This kind of this Siemens PLC is Simatic PLC. It is constant and it has been proved by its worthy in the mechanical engineering, technology process and technology. It also can set the engineering standard, diagnostic, as well as communication. Best regards......
VVago Posts: 784 Rating: (52)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on