Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC CONNECT TO S120 WITH PROFINET

Created by: yeapoy at: 8/21/2012 3:32 AM (13 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

6/1/2017 10:41 AM	Rate (0)
Mustafez Posts: 9 Rating: (0)	Dear Expert, Problem has solved. Thanks for you valuable information.
Mustafez Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

6/3/2017 10:02 AM	Rate (0)
Mustafez Posts: 9 Rating: (0)	Dear experts; I have able to run servo motor on jog mode & speed set point mode by Simotion scout control panel option. what is the program logic to control servo motor on jog mode, speed set point mode & positioning mode by FB243? Now in the PLC program i have only OB1. What should i do? i have no Idea about servo motor FB243 block. have i need to create any DB,FC,FB? I am using telegram 111.
Mustafez Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

6/4/2017 11:42 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/12/2024 Posts: 22446 Rating: (3029)	Hello, i think you mean FB283. Have a look on the application example here: https://support.industry.siemens.com/cs/ww/en/view/67261457 You will find a application description and also example code to control the drive from the PLC program. Regards Christoph

Suggestion To thank Quote Answer

6/6/2017 11:59 AM	Rate (0)
Mustafez Posts: 9 Rating: (0)	Dear experts, I downloaded document & Program file from the link of application example. In the HMI Tag I found an address that is "DB [DBNr] DBX [offset_byte1].0" but i can't understand which DB & Byte is defined of PLC program by this HMI Tag. Please explain the meaning of this HMI Tag. Find the attached file for your better understand. Attachment Screen Shot.JPG (124 Downloads)
Mustafez Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on