Hi;

My goal is to communicate to the PLC through the cp443-1 card configured with MAC address

The attached figure shows the configuration on the factory computer and on my computer; My question is how I can install the protocols for SIMATIC industrial Ethernet (iso) in order to communicate with the cp443-1 card configured with MAC address as it was configured in the factory computer.

thank you.

Hello redha;

Maybe you could start with this FAQ, and all the links it points to:

https://support.industry.siemens.com/cs/document/47885440/how-do-you-configure-an-iso-on-tcp-connection-for-data-exchange-between-s7-300-and-or-s7-400-by-way-of-industrial-ethernet-cps-?dti=0&lc=en-CA

Hope this helps,

Daniel Chartier