Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simatic Manager Read only Problem

Created by: ahmelsayed at: 1/30/2012 8:57 PM (4 Replies)

Rating (1)

Thanks 0

5 Entries

1/30/2012 8:57 PM	Rate (0)
ahmelsayed Experienced Member Joined: 11/14/2010 Last visit: 9/20/2022 Posts: 52 Rating: (2)	Hello Everyone, I have a problem with Simatic manger as Every Project i try to create run only properly at the first time (i.e. i can edit , download and run it) but when i close the project and try to open it again it give me this message with error code(256:92) telling me that "the data is read only" i found a solution for this error by changing the security of S7prj file but the problem still existing. other problem appeared when i tried to create new project, this message appeared with error code (258:42) which i could not find it in STEP7_ErrorCode file !! So Is there any help for the two problems ?? Thanks in avance
	Ahmed Elsayed Control Engineering Student
Suggestion To thank Quote Answer

1/30/2012 10:57 PM	Rate (1)
BeVee Gold Member Joined: 7/18/2011 Last visit: 6/9/2023 Posts: 521 Rating: (88)	Hi ahmelsayed, I found this list of S7 error codes and remedies Kind regards, BV Attachment STEP7_ErrorCode_engl.pdf (1015 Downloads)

Suggestion To thank Quote Answer

2/1/2012 12:01 PM	Rate (0)
ahmelsayed Experienced Member Joined: 11/14/2010 Last visit: 9/20/2022 Posts: 52 Rating: (2)	Thanks BeVee, I read the list of errors and found the first error is listed in them with the solution so it is solved right now, but the second one with this code (256:95) i couldn't find it.
	Ahmed Elsayed Control Engineering Student
Suggestion To thank Quote Answer

2/16/2012 3:30 PM	Rate (0)
Azteke0110 Posts: 376 Rating: (56)	Hello ahmelsayed, Have you found the information what mean this error code (258:42)? My questions are: 1. Which STEP 7 version do you use? 2. Which Windows system do you use? Many thanks for an answer. Best regards Azteke0110
Azteke0110 Posts: 376 Rating: (56)
Suggestion To thank Quote Answer

7/21/2018 8:20 PM	Rate (0)
DCS & DRIVE EXPERT Experienced Member Joined: 5/27/2012 Last visit: 1/12/2023 Posts: 4 Rating: (0)	Dear all Check your pcs7 project folder access. I mean security of sharing switch to read/write access. Regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on