Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC MANAGER S7 PROBLEM

Created by: isurya at: 7/29/2009 8:46 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/29/2009 8:46 AM	Rate (0)
isurya Posts: 107 Rating: (0)	Hi, We have many PLC SIMATIC S7 and I use SIMATIC MANAGER Ver 5.4. At the moment we have 2 ( two ) plc program S7-300 that installed by China engineer and use one notebook from him. The problem is, when I use another notebook or PC that have SIMATIC MANAGER, the program can not be opened because of LANGUAGE problem. Please help me to solve this problem because we only depend on one notebook if I want to communcate this PLC program. I am afraid if this notebook from China is broken, I can not open and troubleshooting with this PLC program because can not be opened by another NOTEBOOK or PC. I enclosed the picture of error. PLEASE HELP ME TO SOLVE THIS ERROR MESSAGE. Regards, INDRA Attachment simatic s7 language prob.jpg (110 Downloads)
isurya Posts: 107 Rating: (0)
Suggestion To thank

7/29/2009 9:45 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, This has already discussed here. Look at /tf/WW/en/Posts/20797 Hope this will helps. Best regards, Hristo Mihalev

Suggestion To thank
This contribution was helpful to 1 thankful Users Ayman Elotaify

7/29/2009 10:06 AM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 6/4/2023 Posts: 4448 Rating: (827)	Hello, *Great. Umencho was faster than me.* Please read in the following thread: Windows language problem- Simatic Man. can not open projects You have firs to open the project. So, Change your reqional language into the language of the project creator. Then follow the instruction in the above link to make the language of the project Neutral . Then You can return the regional language of your PC as per your original settings. Do not forget to restart your PC after each change in the regional settings.
	Last edited by: Ayman Elotaify at: 7/29/2009 10:20 AM Ayman Elotaify
Suggestion To thank

7/29/2009 10:16 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already disussed in the thread mentioned by UMENCHO and Ayman Elotaify. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on