Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC S5 PMC ETHERNET Driver

Created by: Abhijeetmm at: 9/7/2011 9:08 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/7/2011 9:08 AM	Rate (0)
Abhijeetmm Posts: 6 Rating: (0)	At one of our plants wewere using SIMATIC WinCC (V6.0 SP-3), to communicate with S5 155U PLC(CPU948) on SINEC H1 Bus. This Wincc system is communicating on Sinec HI with existing S5 system through CP 1613.ButthePC hard disk crashed so we installed WinCC in another hard disk, butwe are not able to establish the communication since the system is returing an alarm " the communication driver SIMATIC S5 PMC ETHERNET not installed" If anybody hasthis driver or thelink to download this driver please post.
Abhijeetmm Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

9/7/2011 4:36 PM	Rate (0)
Azteke0110 Posts: 376 Rating: (56)	Hello, my recommendation. Please contact your local Siemens partner. Perhaps he can help you. Best Regards Azteke0110
Azteke0110 Posts: 376 Rating: (56)
Suggestion To thank Quote Answer

9/8/2011 8:21 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, The S5-PMC channel DLL can only be inserted into the tag management of WinCC if the relevant SINEC communications driver has been installed! In your case you should reinstall Simatic Net after. Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on