Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simatic S5 Prommer

Created by: nibsy342 at: 5/11/2012 8:55 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/11/2012 8:55 PM	Rate (0)
nibsy342 Posts: 9 Rating: (0)	Hi folks, Could someone please help out with this issue concerning S5 EPROM/EEPROM modules. I do not possess a field PG, or an external Siemens Prommer, so I am unable to write to EPROM. I only have a standard laptop running Step 5 V7.2 - connected through RS232-TTY. Does anyone know if a generic (USB type?) prommer is available that will write to the Siemens module - without having to fork out too much. Thanks in anticipation for any help. Pete.
nibsy342 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/14/2012 12:04 PM	Rate (0)
BeVee Gold Member Joined: 7/18/2011 Last visit: 10/9/2023 Posts: 521 Rating: (91)	Hi nibsy342, Take a look at this Siemens prommer You can connect it to USB port. Kind regards, BV

Suggestion To thank Quote Answer

5/15/2012 12:13 AM	Rate (0)
nibsy342 Posts: 9 Rating: (0)	Brill! where can I get one? None on Ebay...
nibsy342 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/15/2012 12:20 AM	Rate (0)
playerslight Posts: 1064 Rating: (72)	another option is find someone in your area with a pg and have them blow the eprom for you sinc ei had a pg i have used the eprom burn maybe 20 times in ten years
playerslight Posts: 1064 Rating: (72)	Last edited by: playerslight at: 5/15/2012 12:21 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on