Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simeas P analog outputs configuration problem

Created by: IvanSav at: 1/7/2014 5:46 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/7/2014 5:46 PM	Rate (0)
IvanSav Posts: 5 Rating: (0)	Hello all! I have a problem with parametrizing Simeas P 7KG7750-0DA01-0AA0/DD with two analog output channels. It is only possible to parametrize Simeas I/O using Simeas P Par software. When I trying to download Device Configuration, having "2 analog outputs (D)" setting in the "Basic setting for I/O modules" screen, I continiously getting the error message: SIMEAS P Parametrization Parameter not transmitted Selected I/O modules not according with device recommendation: Load module configuration from device Loading module configuration (as well as "Device->Configuration->Receive" menu command) leads to the "No module (A)" value in the mentioned screen. In that case configuration can be downloaded to device, but I/O still remains not operable. On the other hand, in the settings screen of the device in "I/O module state" section I can see following indication: D analog- Parameter! output As I think, that means that device is equipped by AO module and knows about it, but AO is not configured. I have configured a lot of similar devices, but I have this problem first time. Maybe sombody can guess, what's wrong? Can it be a faulty device? Thanks in advance!
IvanSav Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/8/2014 11:40 AM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 9/5/2024 Posts: 1249 Rating: (115)	Hi please contact support.ic@siemens.com Mike
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

3/5/2014 7:35 AM	Rate (0)
renji philipose Posts: 1 Rating: (0)	Hi Ivan Just wondering if you got a solution. I could read parameters (through software) from the device in which case the device fails to identify any optional slots in A - says empty. But on the device display it recognises Option D in slot A. Please get back if U have a solution Cheers
renji philipose Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/5/2014 8:08 AM	Rate (0)
IvanSav Posts: 5 Rating: (0)	renji philipose Hi Ivan Just wondering if you got a solution. I could read parameters (through software) from the device in which case the device fails to identify any optional slots in A - says empty. But on the device display it recognises Option D in slot A. Please get back if U have a solution Cheers Hallo, Renji! I asked my colleagues about the problem, and they told me about one more simeas p with identical problem on other our industrial facility. So I am sure, this is one of the typical faults of simeas p. You need to replace the faulty device with new one.
IvanSav Posts: 5 Rating: (0)	Last edited by: IvanSav at: 3/5/2014 8:09 AM
Suggestion To thank Quote Answer

4/8/2017 10:27 AM	Rate (0)
www.arabienertech... Posts: 1 Rating: (0)	Dear Sir, We have a Voltage Recorder SIMEAS . Recently we replaced the CPU card after that we will try to communicate and fetch the DATA but system show COM0360 : LAN component Program error! Can u suggest to resolve this issue .. I am waiting for your positive reply. Regards, Rao
www.arabienertech... Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on