Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMEAS P500 on PROFIBUS DP

Created by: Import-User-1 at: 6/4/2010 12:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/4/2010 12:00 PM	Rate (0)
Import-User-1 Gold Member Joined: 8/10/2005 Last visit: 2/7/2022 Posts: 3609 Rating: (28)	Import of a Technical Question of an User Guest wrote: I have a SIMEAS-P500 on a PROFIBUS DP with S7315-2DP master. SIMEAS-P500 version is v01.51.01. In S7 object to be connected on PROFIBUS DP I have no SIMEAS P. I tried to get a gsd file from SIENES site but is version v02.20 and when I tried to install the message was: "An update is pressently not possible. In one or more STEP 7 applications at least one gsd file or type file is beeing referenced" Please give me advice to resolve problem !!!!

Suggestion To thank Quote Answer

6/4/2010 1:29 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	Hi, Please close the project that is open in Hardware Configuration. Then try to install GSD file. Best regards, Wizard

Suggestion To thank Quote Answer

6/6/2010 1:51 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 5/28/2023 Posts: 4446 Rating: (827)	Hello, I am agree with Wizard and I want to add small things. You may need to update the firmware of the SIMEAS P. Please visit www.simeas.com and go to download pool. Then sellect: Product family: Power quality and measurements. Product / version SIMEAS P5xx / P6xx And hit the button search. It will switch you to a lot of manuals and firmware updates. Update the firmware. With best regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on