Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMO_MM4 module driver

Created by: thed at: 9/29/2010 9:57 AM (1 Replies)

Rating (1)

Thanks 1

2 Entries

9/29/2010 9:57 AM	Rate (0)
thed Posts: 10 Rating: (0)	An error is occuring in PCS7 V7.1 SP1 during module driver generation for SIMO_MM4 (v.6.5). "The driver block for the signal processing block XXX (means SIMO_MM4) is not available". DES_DIAG is inserted in the chart with the name beginning of "@". Parameter "VALUE" is set accordin to HW configuration. Compilation fo an example project from Drive ES PCS7 produces the same error. Do I need the new version of Drive ES PCS7 (for ex. V7.1)?
thed Posts: 10 Rating: (0)	Last edited by: thed at: 9/29/2010 10:06 AM Last edited by: thed at: 9/29/2010 9:59 AM
Suggestion To thank Quote Answer

9/29/2010 11:05 AM	Rate (1)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	thed An error is occuring in PCS7 V7.1 SP1 during module driver generation for SIMO_MM4 (v.6.5). "The driver block for the signal processing block XXX (means SIMO_MM4) is not available". DES_DIAG is inserted in the chart with the name beginning of "@". Parameter "VALUE" is set accordin to HW configuration. Compilation fo an example project from Drive ES PCS7 produces the same error. Do I need the new version of Drive ES PCS7 (for ex. V7.1)? Hi thed, yes, you Required the New Version of Drive ES PCS7 V7.1, Have a look on the Link for More Detail.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users thed

|

Share this page:

Share this page on...

Follow us on