Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simocode PRO V unable to remove the fault !!

Created by: Ansh Mankad at: 9/22/2012 12:07 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/22/2012 12:07 PM	Rate (0)
Ansh Mankad Posts: 1 Rating: (0)	When i try to download the program, the error comes as follows:- " Parameter changes not possible, MOTOR may be in operation " Reset is also not supporting because of such an error ! Kindly help or suggest some way ASAP as its really urgent ! thanks !
Ansh Mankad Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/24/2012 6:24 AM	Rate (0)
jignesh88 Posts: 3 Rating: (0)	I have same problem in simocode Pro V. I cant reset control function> auxiliary control input >feedback on which is set to Fixed Level-1. Please send process to reset this feedback to factory reset. Attachment D:\Documents and Settings\Administrator\Desktop\simocode\FAULT SIMOCODE.zip (736 Downloads)
jignesh88 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/25/2016 3:25 AM	Rate (0)
cuongaz80 Member Joined: 3/18/2015 Last visit: 11/21/2024 Posts: 3 Rating: (0)	jignesh88 I have same problem in simocode Pro V. I cant reset control function> auxiliary control input >feedback on which is set to Fixed Level-1. Please send process to reset this feedback to factory reset. Me too, please help me

Suggestion To thank Quote Answer

3/25/2016 5:08 PM	Rate (0)
IssamWTL Posts: 101 Rating: (1)	Hi , first of all disconnect the cable profibus , make your modification in hors ligne , connect to simocodewith your PC ,download the programme . it will resolve your problem . if that help let me know .
IssamWTL Posts: 101 Rating: (1)
Suggestion To thank Quote Answer

3/26/2016 2:26 AM	Rate (0)
cuongaz80 Member Joined: 3/18/2015 Last visit: 11/21/2024 Posts: 3 Rating: (0)	Thanks for replied but i do not connect with profibus to simocode . i only connect PC with simocode ,i can not download to simocode when it display Gen fault with rea led

Suggestion To thank Quote Answer

3/27/2016 1:56 PM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Gen Fault RED LED is for fault pending, Rectify fault. Please check before connecting that motor is stopped, no ON/START command present, OFF command present etc.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on