Simodrive 611 cable problem

Hello, 

This is my firt post in this forum.

I have to probe a 6SN1118-0NH01-0AA1 card. The problem is the encoder cable. I have no idea what kind of cable i need.

My motor is a 1FT6064-6AK71-4AG1. The motor encoder is ic2048s/R b25 incremental encoder sin/cos 1Vpp 2048s/R with C and D track.

When i connect an encoder cable that i have from sinamics s120 (I think it can't work with this card and motor) and i try to configure de encoder in SimoComU software, it reports two errors. 

--> 504 error --> Measuring circuit error, motor measuring system

--> 505 error --> Meas.circ.error motor meas.syst.abs.track

Can someone tell me what encoder cable i need or where can i get an schematic to do my own cable?

I think the problem is that. 

Thank you very much  and sorry for my english. 

Aitor

 6FX8002-2CA31-1BB0 is one of your options--it seems you are making a new project or want to test SIMODRIVE 611U control .

you have servo motor with incremental encoder SIN/COS WAVE , YOU NEED CABLE I MENTIONED AT BEGINING -1BB0 IS ABOUT 20 METERS LONG, you can also use shorter one.

if you need purchase that kind of cable you can contact me by PM. 

Aitorenorte

Hello, 

This is my firt post in this forum.

I have to probe a 6SN1118-0NH01-0AA1 card. The problem is the encoder cable. I have no idea what kind of cable i need.

My motor is a 1FT6064-6AK71-4AG1. The motor encoder is ic2048s/R b25 incremental encoder sin/cos 1Vpp 2048s/R with C and D track.

When i connect an encoder cable that i have from sinamics s120 (I think it can't work with this card and motor) and i try to configure de encoder in SimoComU software, it reports two errors. 

--> 504 error --> Measuring circuit error, motor measuring system

--> 505 error --> Meas.circ.error motor meas.syst.abs.track

Can someone tell me what encoder cable i need or where can i get an schematic to do my own cable?

I think the problem is that. 

Thank you very much  and sorry for my english. 

Aitor

 Thank you very much for response. Now, i have an schematic for this cable.

nulizhang

 6FX8002-2CA31-1BB0 is one of your options--it seems you are making a new project or want to test SIMODRIVE 611U control .

you have servo motor with incremental encoder SIN/COS WAVE , YOU NEED CABLE I MENTIONED AT BEGINING -1BB0 IS ABOUT 20 METERS LONG, you can also use shorter one.

if you need purchase that kind of cable you can contact me by PM.  

Vejo que voce conseguiu suporte aqui no forum.

Eu tamb~em estou acessando pela primeira vez.

Tenho um problema e queria compartu=ilhar com a galera.

Um dos Simodrives 6SN1118-0NH01-0AA0 sõ apresenta na tela ###### ao inves da posicao de referencia. Isso foi drrepente nao faltou energia nem nenhum outro evento de natureza fortuita.

Daria pra me orientar em algo:

Jã solicitei ajuda a Siemens mas ta demorando muito...

DEsde ja= agradeco.

Att

Renato

----------------------------------------------------------------------------------
Translation by moderator

Olã Aitorenorte,

I see you got support here in the forum.

I'm also accessing for the first time.

I have a problem and I wanted to share with the crew.

One of the Sims 6sN1118-0NH01-0AA0 Sims only appears in the ###### screen instead of the reference position. This was clearly not lacking energy or any other event of a fortuitous nature.

You could give me something:

I already asked Siemens for help but it's taking so long ...


Thank you in advance.


Att

Renato

Aitorenorte

Hello, 

This is my firt post in this forum.

I have to probe a 6SN1118-0NH01-0AA1 card. The problem is the encoder cable. I have no idea what kind of cable i need.

My motor is a 1FT6064-6AK71-4AG1. The motor encoder is ic2048s/R b25 incremental encoder sin/cos 1Vpp 2048s/R with C and D track.

When i connect an encoder cable that i have from sinamics s120 (I think it can't work with this card and motor) and i try to configure de encoder in SimoComU software, it reports two errors. 

--> 504 error --> Measuring circuit error, motor measuring system

--> 505 error --> Meas.circ.error motor meas.syst.abs.track

Can someone tell me what encoder cable i need or where can i get an schematic to do my own cable?

I think the problem is that. 

Thank you very much  and sorry for my english. 

Aitor