Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

simodrive611A motor connection

Created by: mp24 at: 11/7/2018 11:39 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

11/7/2018 11:39 AM	Rate (0)
mp24 Posts: 3 Rating: (0)	Hello, Would like to connect a 1FK60636AF711AG0 servo motor to a 6SN1118-0AA11-0AA0 card is this possible, and if so,could you supply me the pinlay-out of the X311 connector Thank you very much in advance..
mp24 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/7/2018 1:25 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 3/19/2023 Posts: 3276 Rating: (249)	No possible 1FK6-- motor is for 611D or 611U
	Please Help me to understand your question!
Suggestion To thank Quote Answer

11/7/2018 5:19 PM	Rate (0)
mp24 Posts: 3 Rating: (0)	Hello Nulizhang, Thks for your respond, The motor is original for this siemodrive 611A, but there was a haidenhein LE410PA controller with a PWM inverter card in the siemodrive to control the motor , have changed this inverter card for the 6SN1118-0AA11-0AA0 , and would like to control the card with 0 +/- 10 volt input , but can't find the connection of the X311 In the manual of the 611A i found that the combination of the 6SN1123-1AA00-00A0 and the inverter 6SN1118-0AA11-0AA0 is allowed, Can you explain what kind of motor or encoder i need, or how to make the right encoder cable? Kind regards mp
mp24 Posts: 3 Rating: (0)	Last edited by: mp24 at: 11/7/2018 5:56:50 PM Last edited by: mp24 at: 11/7/2018 6:00:23 PM Last edited by: mp24 at: 11/7/2018 6:02:07 PM
Suggestion To thank Quote Answer

11/8/2018 1:10 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 3/19/2023 Posts: 3276 Rating: (249)	If you want to ude "-- 611A i found that the combination of the 6SN1123-1AA00-00A0 and the inverter 6SN1118-0AA11-0AA0" you must use 1FT5... SERIES MOTOR SUCH AS 1FT5022-0AC01-1 mp24 Hello Nulizhang, Thks for your respond, The motor is original for this siemodrive 611A, but there was a haidenhein LE410PA controller with a PWM inverter card in the siemodrive to control the motor , have changed this inverter card for the 6SN1118-0AA11-0AA0 , and would like to control the card with 0 +/- 10 volt input , but can't find the connection of the X311 In the manual of the 611A i found that the combination of the 6SN1123-1AA00-00A0 and the inverter 6SN1118-0AA11-0AA0 is allowed, Can you explain what kind of motor or encoder i need, or how to make the right encoder cable? Kind regards mp
	Please Help me to understand your question!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Shafay

11/8/2018 6:04 PM	Rate (0)
mp24 Posts: 3 Rating: (0)	Hello Nulizhang, Thanks, for your info Kind regards Marius
mp24 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on