Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simotion D245-2 SF led is RED and communication between HMI and PLC not working

Created by: cevdetdal at: 9/11/2024 7:10 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/11/2024 7:10 AM	Rate (0)
cevdetdal Joined: 2/22/2023 Last visit: 9/18/2024 Posts: 4 Rating: (0)	I have project with D245-2, HMI KTP700 basic, 3 SINAMIC together. Program work normaly if I run PLC with run state on SCOUT (PC) but if I stop machine and cut-off electricity PLC doesn't start. SF led is red and communication between HMI and PLC doesn't work. I need help. Attachment plc_status_led.jpeg (92 Downloads)

Suggestion To thank Quote Answer

9/11/2024 11:00 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 10/4/2024 Posts: 4734 Rating: (723)	While offline check in your project if a device variable _startupData.operationMode = RUN. If not, change it to that value and download the project. Next to check is a diagnostic buffer of a device. Search entries for any stop reasons.
	Last edited by: jacek d at: 09/11/2024 11:02:55 Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

9/16/2024 10:36 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	go online and check diagnostic buffer

Suggestion To thank Quote Answer

9/18/2024 6:00 AM	Rate (0)
cevdetdal Joined: 2/22/2023 Last visit: 9/18/2024 Posts: 4 Rating: (0)	I have upload project to the PLC it work again. But the problem is when I stop machine the problem happens again. May be CF card fails. How can I check it?

Suggestion To thank Quote Answer

9/18/2024 6:01 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	open diagnostic buffer and check what logged here

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on