Hi 

im working with Simotion D445. Scout 5.2

I have a measuring input configured on X122.8 of one of the CU320 present on the configuration.

Actually as soon as i do this instruction

myRetDINT := _enableMeasuringInput(
measuringInput     := V_TR042_par_anello.Config.ToMi_M
,measuredEdgeMode   := RISING_EDGE
,measuringRangeMode := WITHOUT_SPECIFIC_AREA
,nextCommand        := IMMEDIATELY
,commandId          := _GetCommandId()
);

i get the state=MEASURING_ERROR with errorgroup 32(dec).

i have many other measuring input configured, but the work correctly.

Input is assigned also in the addess list, and in this area i get "input not syncro"

Could be this the cause of this error?

thanks

Hi, 

i use Telegram 3/7 (391) 

and Sinamics side is correctly configured, as pictures attached.

thanks

Hi,

strange because the other MI are working

So, to fix the problem, my configuration is the following:

some CU have 1 MI

Some CU have 2 MI

some CU have 3 MI 

also the simotion integrated have 2 MI

which input i have to use and which telegrams? 

thanks for quick answer, if you can. today palnt is stop and i can work (i'm in mexico -8 UTC)

hi, thanks for your inestimable help.

everything is working fine.

for any other problem for sure i will contact you.