Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

simotion scout version upgrade

Created by: Import-User-1 at: 1/20/2011 1:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/20/2011 1:14 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	jeep079 I currently have simotion scout version 4.1.5.6 installed. I recently tried to connect to a CU320-2DP on a sinamics S120 with firmware version 4.3. The highest version scout displayed was 4.2. Do I need to upgrade scout to connect with a later firmware version?
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

1/20/2011 1:30 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/10/2024 Posts: 22409 Rating: (3017)	Hello, you need the SINAMICS SSP V4.3 for the CU320-2 with FW 4.3. Regards Christoph

Suggestion To thank Quote Answer

1/20/2011 2:19 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	You should have it there if durring installation of STARTER software you ticking off the relevant checkbox. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

1/20/2011 10:22 PM	Rate (0)
DenisMor Posts: 344 Rating: (50)	There was also a release of v4.3 SP2 Sinamics firmware which is not included in Scout 4.1.5.6 distribution as it came out later. Check which v4.3 firmware version you are using with CU320-2.
DenisMor Posts: 344 Rating: (50)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on