Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simotion with Robicon Perfect Harmony drives and possibly WinCC

Created by: RobD at: 7/25/2011 8:18 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

7/25/2011 8:18 AM	Rate (0)
RobD Advanced Member Joined: 4/3/2008 Last visit: 9/18/2024 Posts: 14 Rating: (3)	Mehta Dear All, I am going to proposed Simotion-C240 and Wincc Scada to my customer.I would like to confirm that whether i can use Wincc scada directly in place of HMI or any supporting Hardware/License is requires? There is no PLC in this configuration. Tag transfer between Simotion and Wincc is just simple like Flexi? Rgds Ashish Hi Ashish Did you find a solution to Simotion/WinCC connection? I am interested as we have to provide a similiar system using Simotion with Robicon Perfect Harmony drives and possibly WinCC. Would it be better to use WinCC-Flex? thanks Rob Splitted from SimotionC and Wincc.
	Last edited by: O_Moderator at: 7/25/2011 10:12 AM new subject after splitting
Suggestion To thank Quote Answer

8/4/2011 8:40 AM	Rate (0)
Manfred Experienced Member Joined: 6/22/2006 Last visit: 3/7/2022 Posts: 156 Rating: (17)	Hi, I have heard that a WinCC channel for SIMOTION will be available in the next few weeks. This will be announced here: http://support.automation.siemens.com/WW/view/en/10805436/133400 Best Regards Manfred

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RobD

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on