Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simple sample: indirect addressing of 1200/1500 absolute tags.

Created by: Denilson Pegaia at: 6/5/2021 12:23 PM (4 Replies)

Rating (3)

Thanks 3

5 Entries

6/5/2021 12:23 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 12/1/2023 Posts: 4279 Rating: (1378)	Hi, as from TIA V17, it is possible to indirect addressing of 1200/1500, multiplexing of absolute addresses. The setting is done directly in the address definition window. Attachment mux.png (619 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/5/2021 12:24 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 12/1/2023 Posts: 4279 Rating: (1378)	Sample project: Attachment Uni4_20210605_0721.zip (293 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users SkySkier YentelSa

6/9/2021 4:49 PM	Rate (0)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 12/1/2023 Posts: 253 Rating: (53)	Hi. Could you please tell does this solution work with a Client-Server architecture?
	Last edited by: TerminalBuzz at: 06/09/2021 17:00:30
Suggestion To thank Quote Answer

6/9/2021 7:05 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 12/1/2023 Posts: 4279 Rating: (1378)	Hi, The multiplex always works, but the variables have global values, so the selection will be common to all instances.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/26/2021 1:07 PM	Rate (0)
SkySkier Regular Member Joined: 4/23/2010 Last visit: 10/22/2023 Posts: 3 Rating: (1)	should have been obvious but i forgot to "change device" to V17 image. Once in V17 indirecting in Unified works like it does in Comfort. The example was helpful to identify my issue.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Denilson Pegaia

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC WinCC Unified

Follow us on