Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simulation - Graphics not rendering properly

Created by: U_a1dd5556-9bdb-48ae-b0a8-7e96964fff26 at: 3/19/2015 12:59 AM (2 Replies)

Rating (0)

Thanks 3

3 Entries

3/19/2015 12:59 AM	Rate (0)
U_a1dd5556-9bdb-4... Posts: 3 Rating: (0)	Hello, I am attempting to simulate HMI screens on my laptop in order to get screenshots. I am using TIA V13, and an actual PLC. The issue: certain graphics do not appear at all when simulated, although they do appear when the project is loaded into an actual HMI. Has anyone run into a similar problem? Attached is a screenshot of the unsuccessful simulation. Attachment Capture.PNG (170 Downloads)
U_a1dd5556-9bdb-4... Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/19/2015 6:39 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, maybe it's a problem with your display settings: https://support.industry.siemens.com/cs/ww/en/view/90301561 Did you compile the project with "rebuild all" before starting simulation? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users U_a1dd5556-9bdb-4... Klusser Grimwall

3/19/2015 6:34 PM	Rate (0)
U_a1dd5556-9bdb-4... Posts: 3 Rating: (0)	The display settings fixed it! My thanks go to you, K!ke.
U_a1dd5556-9bdb-4... Posts: 3 Rating: (0)	Last edited by: U_a1dd5556-9bdb-48ae-b0a8-7e96964fff26 at: 3/19/2015 6:35:36 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on