Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMULATION

Created by: hemubadani at: 6/10/2011 7:06 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/10/2011 7:06 PM	Rate (0)
hemubadani Posts: 2 Rating: (0)	I have installed 802D SL system on a grinder with four axis. The order of axis is as under : X, Y, Z, SPINDLE When I go to simulation mode I see X and Y. How can I change this order and see X and Z Please help
hemubadani Posts: 2 Rating: (0)	Last edited by: hemubadani at: 6/10/2011 7:13 PM
Suggestion To thank Quote Answer

6/10/2011 8:31 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello..... Can you check the parameter 280 and 330 in Display MD Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/11/2011 5:47 AM	Rate (0)
hemubadani Posts: 2 Rating: (0)	I will get back you on this
hemubadani Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on