Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamcs S120 Overspeed Limit

Created by: baevrep at: 9/8/2014 4:13 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/8/2014 4:13 PM	Rate (0)
baevrep Posts: 32 Rating: (1)	Hello, Have a small request. Does anybody know if it is possible to create or to put on a delay on p322 Maximum motor speed? In a certain situation on our aplication we actually want that the drive could handle the motors overspeed without tripping or activate a fault message.
baevrep Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

9/8/2014 7:16 PM	Rate (0)
A.Gabardo Posts: 87 Rating: (6)	Hi. So far i know it is not possible modify the time for Overspeed. When reached the limit, it will activate a fixed time (1000us). After this time a fault starts. (look Function diagram 3050). But you can try change the hysteresis for Overspeed p2162. Hope this helps. Regards
A.Gabardo Posts: 87 Rating: (6)
Suggestion To thank Quote Answer

9/9/2014 11:13 AM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (65)	Hello, this parameter could be changed, but it`s the absolute limit where you should use the motor. So if you would do it in your own responsility, why not. Zako

Suggestion To thank Quote Answer

9/10/2014 5:12 PM	Rate (0)
baevrep Posts: 32 Rating: (1)	Thank you guys. I struggle a bit adjusting these limits as high as I want. (p2162 and p1082) Can you please guide me on how to do it? Attachment Adjust speed limit.jpg (102 Downloads)
baevrep Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on