Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamic DCM for Electromagnetic Load

Created by: Idoet187 at: 3/7/2012 11:37 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

3/7/2012 11:37 AM	Rate (0)
Idoet187 Posts: 2 Rating: (0)	We would apply a SINAMIC DCM for5 (five) units in parallel of electromagnetic load. Each magnet device has 0.2 kW and 110 Vdc. Pls advise the proper type of Sinamic DCM for this applications include necessary accessories parts such as Line Choke, Output Choke, or other special additional parts? Tnx
Idoet187 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/16/2012 10:25 AM	Rate (0)
Idoet187 Posts: 2 Rating: (0)	Idoet187 We would apply a SINAMIC DCM for5 (five) units in parallel of electromagnetic load. Each magnet device has 0.2 kW and 110 Vdc. Pls advise the proper type of Sinamic DCM for this applications include necessary accessories parts such as Line Choke, Output Choke, or other special additional parts? Tnx
Idoet187 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/16/2012 4:37 PM	Rate (1)
frimos Posts: 44 Rating: (6)	Hello! check these descriptions: http://support.automation.siemens.com/WW/view/en/9466880 http://support.automation.siemens.com/WW/view/en/9472382 If you need more information please open an official support request. regards frimos
frimos Posts: 44 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on