Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sinamic s110 cu 305 DP

Created by: umeshkushwaha at: 8/11/2012 6:59 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/11/2012 6:59 AM	Rate (0)
umeshkushwaha Posts: 2 Rating: (0)	hello i m working on s110 cu305 dp and servo motor with Drive cliq interface, done the communication... Using starter Selecting the basic positioning (speed contol with encoder)...i not understanding what to do further step? the motor is running by using control panel .but selecting the basic positioning what to do next step? i m also done terminal connection .Connected the analog pot to run the motor but not understanding which analog input to give during basic positioning. i hav done two simple program by selcting extended set point channel and basic positioner . i am sending my two program .what i hav done pls tell me. and pls give me some example to learn more. thanking u
umeshkushwaha Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/26/2012 12:36 PM	Rate (0)
kishorB Posts: 4 Rating: (0)	pl. find the attached basic positoning program FYI For details check graphical presentation in drives. Attachment Spot_wel.zip (305 Downloads)
kishorB Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/24/2012 8:26 AM	Rate (0)
umeshkushwaha Posts: 2 Rating: (0)	Dear all, I want to communicate s71200 ,HMI KTP600 and Cu305 DP through profibus. My application in such away that i want to give position value and acceleration value from HMI . what procedure require for these? and How i communicate these through profibus? pls help.. thanx & regards
umeshkushwaha Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/25/2013 2:50 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 1/20/2023 Posts: 2685 Rating: (135)	New question was splitted to how can i do position control in s7 1200?. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on