Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINAMIC S120 CPU 320_2 PN

Created by: Hoan95 at: 3/4/2019 10:34 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/4/2019 10:34 AM	Rate (0)
Hoan95 Regular Member Joined: 9/28/2018 Last visit: 3/6/2024 Posts: 14 Rating: (0)	Hi ,everybody .I use inverter to control the three-phase synchronous motor.I choose Profidrive SIEMENS telegram 111, PZD 12 / 12 SINAMIC S120 uses the Starter --> three-phase synchronous motor run , but when using Step 7, the braking motor is not run (image) .Hope everybody help please. Thank. Hoan, Attachment error.PNG (44 Downloads)

Suggestion To thank

3/4/2019 10:41 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	https://support.industry.siemens.com/tf/ww/en/posts/sinamic-s120-cpu-320-2-pn/208852/?page=0&pageSize=10

Suggestion To thank

3/4/2019 11:11 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject SINAMIC S120 CPU 320_2 PN is published within the conference SINAMICS. Best regards Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on