Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics DCM / CP5711 / PC / Commissioning

Created by: habilis at: 11/23/2011 4:53 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/23/2011 4:53 PM	Rate (0)
habilis Posts: 2 Rating: (0)	Hi Is it possible to commission Sinamics DCM (6RA8031-6DS22-0AA0) with STARTER commissioning tool using SIMATIC NET CP5711 (6GK1571-1AA00)? I know that sinamics DCM (6RA8031-6DS22-0AA0) has a PROFIBUS interface on CUD, named Connector X126 but i'm not sure that this can be connected to CP5711 and finally to PC
habilis Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/24/2011 5:15 AM	Rate (0)
KSN Platinum Member Joined: 8/25/2006 Last visit: 12/2/2024 Posts: 2211 Rating: (280)	Hello. Yes, you may use CP5711 for commissioning DCM with STARTER. Use the latest STARTER version 4.2 HF1and Sinamics DCM SSP V1.3 for STARTER.

Suggestion To thank Quote Answer

11/24/2011 2:27 PM	Rate (0)
habilis Posts: 2 Rating: (0)	Thank you very much! I will try it
habilis Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on