Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINAMICS DCM

Created by: Felix_1 at: 2/23/2013 5:55 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/23/2013 5:55 PM	Rate (0)
Felix_1 Posts: 1 Rating: (0)	Can anyone tell me, what is the parameter which places the output voltage to the motor field?. It appears that only the power to drive. in the parameter 50102. best regards.
Felix_1 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/25/2013 12:24 AM	Rate (0)
Graeme Platinum Member Joined: 6/4/2008 Last visit: 12/10/2024 Posts: 1511 Rating: (327)	Hi, the Field Voltage is automatically calculated based on the information you supply during commissioning/wizard. Make sure you enter correct data for the Tacho and any Field weakening. The Actual V_Field can be viewed in parameter r50033. Regards, Graeme

Suggestion To thank Quote Answer

4/4/2013 9:19 AM	Rate (0)
Mkhatri Posts: 31 Rating: (2)	Dear Friend, there is no parameter to set the out put voltage of field. only fill the ratedfield current(Name plate of the motor) Best Regards RK
Mkhatri Posts: 31 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on