Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sinamics G120 V4.5

Created by: innovations at: 6/13/2012 9:37 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

6/13/2012 9:37 AM	Rate (0)
innovations Experienced Member Joined: 5/21/2008 Last visit: 12/4/2024 Posts: 91 Rating: (0)	Dear all, i have simotion scoutV4.2 & iwant to communicate with sinamics control unitCU240E-2V4.5, but it is not available in this scout version so i downloaded theSSP given with StarterV4.3 in entry ID26233208. but nowwheni create a new project & select the control unit withV4.5,it does not insert the drive, whereas if i select V4.4 it is able to insert the drive. pl. suggest how to overcome this? B/R

Suggestion To thank Quote Answer

6/13/2012 9:43 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/7/2024 Posts: 22474 Rating: (3036)	Hello, SSP V4.5 not released for Scout V4.2, you must use Scout V4.3 for SINAMICS V4.5. The SSP Interfaces are incompatible between V4.2 and V4.3 ! Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MecoMatic

6/13/2012 3:47 PM	Rate (0)
innovations Experienced Member Joined: 5/21/2008 Last visit: 12/4/2024 Posts: 91 Rating: (0)	Dear cristophD, thanks a lot for the valued information! B/R

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on