Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINAMICS G150 - PCS7

Created by: PuikkoP at: 6/5/2009 3:03 PM (7 Replies)

Rating (1)

Thanks 3

8 Entries

6/5/2009 3:03 PM	Rate (0)
PuikkoP Posts: 31 Rating: (1)	Howdy! Currently working in project where we will use Sinamics G150 drives. System: PCS7 V5.2 WinCC V5.1 Where we could find cfc driverblock for Sinamics G150? Also faceplate files would be really helpful. Or is it only way to do them ourself? timeline is very tight. Best regards, PA
PuikkoP Posts: 31 Rating: (1)
Suggestion To thank Quote Answer

6/5/2009 7:54 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi PuikkoP, I would recommend making your own block since SINAMICS G150 is quite recent (if I am not mistaken) compared to PCS V5.2... Probably you can look at the new Drive ES for creating your block and faceplate. Regards
Phantom75 Posts: 2661 Rating: (279)	Last edited by: Phantom75 at: 6/5/2009 9:03 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ritu

6/5/2009 8:23 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/1/2025 Posts: 10233 Rating: (1181)	Hello, I found this info: SINAMICS is an integral part of Totally Integrated Automation (TIA). The TIA concept offers an optimized range of products for automation and drive technology. This concept is characterized by planning / design, communication, and data management procedures that are consistent throughout the product range. SINAMICS is totally integrated in the TIA concept. Separate S7/PCS7 blocks and faceplates for WinCC are available. But maybe is better to build by yourselves then lose time to find it. Of course some of other members here could helps... Regards Hristo Mihalev
	Last edited by: UMENCHO at: 6/5/2009 8:25 PM You have already recived the right answer since I finished with mine.
Suggestion To thank Quote Answer

6/5/2009 9:06 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hey UMENCHO, Sorry, but I had to be fast to improve my position in the ranking list! Have a great weekend! Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users S_Moderator ritu

7/13/2009 7:50 AM	Rate (0)
PuikkoP Posts: 31 Rating: (1)	Thank you for your answers. Okay if we do own block. Where we can find documentation about communication. Just thinking what bits/words we have in statusword and controlword. Thanks, PP
PuikkoP Posts: 31 Rating: (1)
Suggestion To thank Quote Answer

7/13/2009 9:55 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/1/2025 Posts: 10233 Rating: (1181)	Hello, Look at SINAMICS G130/G150, List Manual (from page 769). Regards

Suggestion To thank Quote Answer

7/13/2009 1:53 PM	Rate (0)
PuikkoP Posts: 31 Rating: (1)	Thank you! Too many manuals with too many pages... =) PP
PuikkoP Posts: 31 Rating: (1)
Suggestion To thank Quote Answer

7/18/2009 1:55 PM

Rate (1)

CBo

Helpful

Joined: 4/5/2006

Last visit: 12/12/2024

Posts: 917

Rating:

(63)

Hi Puikko.

here a link

Updates:SIMATIC PCS7 block for SINAMICS G150

Hope can help you
REgards

|

Share this page:

Share this page on...

Follow us on