Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics & p0133

Created by: Simarket at: 10/10/2017 6:11 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

10/10/2017 6:11 AM	Rate (0)
Simarket Posts: 3 Rating: (0)	Hello, I need help for parameter p0133. We have motor 1LE1003-1DA30-4AB4-Z D47+L22. This motor - 400VD. Do I need to change this setting (p0133) in Sinamics settings?
Simarket Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/10/2017 12:59 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello, for 1LE1 you have to set it during the "Configuration wizard". Star or Delta. Depending on the wiring of the motor windings. Star or Delta.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Simarket

10/11/2017 6:38 AM	Rate (0)
Simarket Posts: 3 Rating: (0)	Thank you for answer! But we not have in menu 1LE1 motor. May be we have old version software for our panel. Please send me manual for IOP panel, configuration menu.
Simarket Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/12/2017 11:44 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello. I use starter. https://support.industry.siemens.com/cs/ww/en/view/26233208
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on