Navigation

Sinamics S-120 close loop functioning

Created by: shanker_bhati at: 12/18/2011 4:36 PM (1 Replies)

12/18/2011 4:36 PM	Rate (0)
shanker_bhati Posts: 4 Rating: (0)	Hi, Can anybody tell me how servo motor is stopping after reaching at desired position,or is it soft braking or Brake voltage is going to brake coil ?
shanker_bhati Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

12/19/2011 1:21 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 9/30/2024 Posts: 5909 Rating: (805)	Hello Shanker, the controller calculates a certain (negative) torque to stop the servo motor. By inserting a determined acceleration, speed and jerk an adequate braking torque will be calculated. According to this explanation the rotor isstopped by current. With a suitable setting of the mentioned parameters a smooth and soft braking operation can be achieved.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer