Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics S110 with Step 7 Lite

Created by: Benjamin.Owen.89 at: 11/29/2011 11:53 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/29/2011 11:53 AM	Rate (0)
Benjamin.Owen.89 Posts: 16 Rating: (0)	Hi Everyone, Is it possible to use Step 7 Lite to set up a Sinamics S110 servo drive (as in add the device to the PLC). We have machines within my organisation with a full version of Step 7 on them but they are held by our maintainence engineers and are therefore difficult to keep hold of for a decent amount of time. So,I want to install Step 7 Lite on my personal computer, I know that it will be fine for the more basic programs in my project but it would be ideal if I can drop the S110 drive and a OP27 HMI on the PROFIBUS within the hardware setup???? I suppose I am trying to determine the limitations of the package... Just for reference I am using a S7-300 with a 315-DP CPU. Cheers in advance, Benjamin
Benjamin.Owen.89 Posts: 16 Rating: (0)
Suggestion To thank

11/29/2011 11:59 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already published in the following thread Step 7 Lite for S110 Drive Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on